Votronic batterijlader AC naar DC (38-170Ah) Votronic chargeur de batterie AC à DC (38-170Ah)

302-1123

> 2 weken / semaines

Votronic

€249.00

Lader voor leefbatterij en startbatterij. 

Specificaties: 

  • Charging programs (gel, AGM, acid and LiFePO4) adjustable to the battery type
  • The charging voltage is free from peaks and is controlled in such a way, that overcharging of the batteries is excluded
  • Fully Automatic Continuous Operation: The charger may be connected continuously to the battery, thus keeping the full charge. Battery discharge in case of power failure is avoided (separation by safety relay)
  • Lithium LiFePO4 Auto Wake Up: Periodical automatic activation of the battery cell balancing BMS
  • Battery regeneration in case of extended standstill periods: twice a week to avoid harmful acid accumulation
  • Parallel and Floating Operation: In case of simultaneous consumption, the battery will either continue to be charged or maintained via trickle charging. Calculation and control of the adaptation of the charging times is effected automatically by the charger
  • Unattended Charging: Multiple protection against overload, overheating, overvoltage, short circuit, reverse battery, incorrect behaviour and back discharge of the battery by electronically controlled gradual reduction down to complete separation of charger and battery by integrated safety relays
  • Connection for Battery Temperature Sensor: Lead batteries (acid, gel, AGM): In case of low outside temperatures, full charging of the weak battery is improved by automatic adaptation of the charging voltage to the battery temperature, and in case of summery temperatures unnecessary battery gassing and battery load will be avoided.
    For LiFePO4 batteries, the battery temperature sensor is required: It serves for battery protection in case of high temperatures or particularly in case of low temperatures below 0 °C
  • Silent Run Function: Noise‐optimised operation (night operation) at the touch of a button
  • Power Pack Function: Allows supplyof the consumers without battery (such as during battery replacement)
  • Charging Cable Compensation: Automatic compensation of voltage losses on the charging cables
  • Integrated On‐board Mains Suppression Filter: Unproblematic parallel operation with solar systems, wind and petroldriven generators, dynamos etc. on one battery
  • Charging aid for totally discharged lead batteries: Gentle preliminary charging of the (lead‐acid, gel, AGM) battery to 8 V, followed by powerful support of the battery, in case of possibly switched‐on consumers
  • Separation of the batteries in case of power failure, overheating, incorrect behaviour (safety relay for each charging port)
  • Separate auxiliary charging port "S" for support charging and conservation of charge of the vehicle's starter battery
Technical details
Supply Voltage (Mains Frequency 45 ‐ 65 Hz) 110 V ‐ 230 V
Voltage Range Mains Function, all Types 85 V ‐ 270 V, short‐time 305 V (5 sec.)
Mains Voltage Range for Full Charging Capacity 95 V ‐ 270 V
Mains Power Consumption max. 240 W
Mains Power Consumption at Readiness for Charging 1.9 W
Active Sinusoidal Power Factor Correction (CosPhi = 1) Yes
Approx. Charging Current at 110 V Supply Voltage 15 A
Connection for Remote Control Automatic Charger Yes
Fitting Position of Unit any
Temperature Range ‐20 / +45 °C
Speed‐controlled, temperature‐controlled Fan Yes
Gradual Reduction of Charging Capacity at Overtemperature Yes
Safety Disconnection in Case of Overheating Yes
Noise‐reduction of Fan, Night Operation (Silent Run) Yes
Protection Class/System of Protection I / IP21
Dimensions, incl. Mounting Flanges (mm) 215 x 160 x 72
Weight 1250 g
Ambient Conditions, Humidity of Air max. 95 % RH, no condensation
Safety Regulations EN 60335‐2‐29
Main Charging Port Battery I
Nominal Battery Voltage Lead/LiFePO4 Battery 12 V / 12 V‐13.3 V
Selectable Charging Programs Lead‐Gel/AGM/Acid, LiFePO4 4
Battery Capacity (recommended) 60 Ah ‐ 110 Ah
Battery Capacity (acc. to case of application, such as also LiFePO4) 38 Ah ‐ 170 Ah
Charging Current Main Charging, Phase I, 8 V to U1; 0‐15.5 h 15 A
Charging/Floating/Load Current, controlled, Phase U1‐U2‐U3 0 A ‐ 15 A
Minimum Battery Voltage for Charging Start 0 V
Preliminary Charging Current (Deeply Discharged Batt. 0 V‐8 V) 7.5 A
Reverse Current from Battery (Power Failure) < 0.5 mA
Reset Voltage (30 sec.), depending on Battery Type 12.75 V / 13.25 V
Limit of Charging Voltage (Protection of Connected Consumers) 15.0 V
External Overvoltage Disconnection (20 sec.) 15.5 V
Ripple Factor Voltage < 30 mV rms
Charging Timer 4‐fold
Safety Protect. ag. Reverse Batt./Short‐circuit/Back Discharge Yes
Safety Timer per Charging Phase I/U1/U2 Yes
Lead Battery Regeneration at extended down‐time 2x week 1 h Yes
LiFePO4 Auto Wake Up at extend. down‐time, every 10 days 0.5 h Yes
or LiFePO4 Standstill Trickle Charge (Seasonal Operation) Yes
Input for Battery Temperature Sensor Yes
Power Pack Operation (e. g. Supply During Battery Replacement) Yes
2. Auxiliary Port Vehicle's Starter Battery II (Signalling Port Mains)
Nominal Battery Voltage (Lead) 12 V
Charging Current or Rating as Signalling Port 0 A ‐ 2 A
Safety Protect. ag. Reverse Batt./Short‐circuit/Back Discharge Yes

 

Lader voor leefbatterij en startbatterij. 

Specificaties: 

  • Charging programs (gel, AGM, acid and LiFePO4) adjustable to the battery type
  • The charging voltage is free from peaks and is controlled in such a way, that overcharging of the batteries is excluded
  • Fully Automatic Continuous Operation: The charger may be connected continuously to the battery, thus keeping the full charge. Battery discharge in case of power failure is avoided (separation by safety relay)
  • Lithium LiFePO4 Auto Wake Up: Periodical automatic activation of the battery cell balancing BMS
  • Battery regeneration in case of extended standstill periods: twice a week to avoid harmful acid accumulation
  • Parallel and Floating Operation: In case of simultaneous consumption, the battery will either continue to be charged or maintained via trickle charging. Calculation and control of the adaptation of the charging times is effected automatically by the charger
  • Unattended Charging: Multiple protection against overload, overheating, overvoltage, short circuit, reverse battery, incorrect behaviour and back discharge of the battery by electronically controlled gradual reduction down to complete separation of charger and battery by integrated safety relays
  • Connection for Battery Temperature Sensor: Lead batteries (acid, gel, AGM): In case of low outside temperatures, full charging of the weak battery is improved by automatic adaptation of the charging voltage to the battery temperature, and in case of summery temperatures unnecessary battery gassing and battery load will be avoided.
    For LiFePO4 batteries, the battery temperature sensor is required: It serves for battery protection in case of high temperatures or particularly in case of low temperatures below 0 °C
  • Silent Run Function: Noise‐optimised operation (night operation) at the touch of a button
  • Power Pack Function: Allows supplyof the consumers without battery (such as during battery replacement)
  • Charging Cable Compensation: Automatic compensation of voltage losses on the charging cables
  • Integrated On‐board Mains Suppression Filter: Unproblematic parallel operation with solar systems, wind and petroldriven generators, dynamos etc. on one battery
  • Charging aid for totally discharged lead batteries: Gentle preliminary charging of the (lead‐acid, gel, AGM) battery to 8 V, followed by powerful support of the battery, in case of possibly switched‐on consumers
  • Separation of the batteries in case of power failure, overheating, incorrect behaviour (safety relay for each charging port)
  • Separate auxiliary charging port "S" for support charging and conservation of charge of the vehicle's starter battery
Technical details
Supply Voltage (Mains Frequency 45 ‐ 65 Hz) 110 V ‐ 230 V
Voltage Range Mains Function, all Types 85 V ‐ 270 V, short‐time 305 V (5 sec.)
Mains Voltage Range for Full Charging Capacity 95 V ‐ 270 V
Mains Power Consumption max. 240 W
Mains Power Consumption at Readiness for Charging 1.9 W
Active Sinusoidal Power Factor Correction (CosPhi = 1) Yes
Approx. Charging Current at 110 V Supply Voltage 15 A
Connection for Remote Control Automatic Charger Yes
Fitting Position of Unit any
Temperature Range ‐20 / +45 °C
Speed‐controlled, temperature‐controlled Fan Yes
Gradual Reduction of Charging Capacity at Overtemperature Yes
Safety Disconnection in Case of Overheating Yes
Noise‐reduction of Fan, Night Operation (Silent Run) Yes
Protection Class/System of Protection I / IP21
Dimensions, incl. Mounting Flanges (mm) 215 x 160 x 72
Weight 1250 g
Ambient Conditions, Humidity of Air max. 95 % RH, no condensation
Safety Regulations EN 60335‐2‐29
Main Charging Port Battery I
Nominal Battery Voltage Lead/LiFePO4 Battery 12 V / 12 V‐13.3 V
Selectable Charging Programs Lead‐Gel/AGM/Acid, LiFePO4 4
Battery Capacity (recommended) 60 Ah ‐ 110 Ah
Battery Capacity (acc. to case of application, such as also LiFePO4) 38 Ah ‐ 170 Ah
Charging Current Main Charging, Phase I, 8 V to U1; 0‐15.5 h 15 A
Charging/Floating/Load Current, controlled, Phase U1‐U2‐U3 0 A ‐ 15 A
Minimum Battery Voltage for Charging Start 0 V
Preliminary Charging Current (Deeply Discharged Batt. 0 V‐8 V) 7.5 A
Reverse Current from Battery (Power Failure) < 0.5 mA
Reset Voltage (30 sec.), depending on Battery Type 12.75 V / 13.25 V
Limit of Charging Voltage (Protection of Connected Consumers) 15.0 V
External Overvoltage Disconnection (20 sec.) 15.5 V
Ripple Factor Voltage < 30 mV rms
Charging Timer 4‐fold
Safety Protect. ag. Reverse Batt./Short‐circuit/Back Discharge Yes
Safety Timer per Charging Phase I/U1/U2 Yes
Lead Battery Regeneration at extended down‐time 2x week 1 h Yes
LiFePO4 Auto Wake Up at extend. down‐time, every 10 days 0.5 h Yes
or LiFePO4 Standstill Trickle Charge (Seasonal Operation) Yes
Input for Battery Temperature Sensor Yes
Power Pack Operation (e. g. Supply During Battery Replacement) Yes
2. Auxiliary Port Vehicle's Starter Battery II (Signalling Port Mains)
Nominal Battery Voltage (Lead) 12 V
Charging Current or Rating as Signalling Port 0 A ‐ 2 A
Safety Protect. ag. Reverse Batt./Short‐circuit/Back Discharge Yes

 

Levertermijnen zijn indicatief en kunnen wijzigen.
U krijgt een definitieve levertermijn toegestuurd na uw bestelling.

A) Snelle levertermijn / artikel op voorraad:
2 - 5 werkdagen

B) Gemiddelde levertermijn / artikel op voorraad bij leverancier:
5 - 10 werkdagen

C) Op bestelling / artikel niet op voorraad of op productie:
>2 weken

D) Op aanvraag:
Sterk wisselende levertermijn. Soms snel leverbaar, soms lange wachttijd.
Concrete levertermijn kan u opvragen via e-mail of telefonisch.

Verzendkosten worden berekend op basis van het gewicht/omvang van het pakket.
U kan de definitieve verzendkost berekenen in uw winkelmandje.

Oversized artikels kunnen op verzoek worden thuis geleverd. De kosten hiervan zijn afhankelijk van de omvang van het product en het type van het afleveringsadres.
Deze artikels staan op de webshop aangegeven met “op aanvraag”. Gelieve ons te contacteren voor meer informatie omtrent de leveringsmogelijkheden en -kosten.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Les délais de livraison sont indicatifs et peuvent changer.
Vous recevrez un délai de livraison final après votre commande.

A) Livraison rapide / article en stock:
2 - 5 jours ouvrés

B) Livraison moyenne / article en stock chez le fournisseur:
5 - 10 jours ouvrés

C) Sur commande / pas en stock ou en production:
> 2 semaines

D) Sur demande:
Délai de livraison très variable. Parfois disponible rapidement, parfois long temps d'attente.
Vous pouvez demander le délai de livraison concret par e-mail.

Les frais de port sont calculés en fonction du poids / taille du colis.
Vous pouvez calculer le coût de livraison final dans votre panier.

Les articles surdimensionnés peuvent être livrés à la maison sur demande. Les coûts dépendent de la taille du produit et du type d'adresse de livraison.
Ces articles sont marqués avec "sur demande". Veuillez nous contacter pour plus d'informations sur les options de livraison et les coûts.
Levertermijnen zijn indicatief en kunnen wijzigen.
U krijgt een definitieve levertermijn toegestuurd na uw bestelling.

A) Snelle levertermijn / artikel op voorraad:
2 - 5 werkdagen

B) Gemiddelde levertermijn / artikel op voorraad bij leverancier:
5 - 10 werkdagen

C) Op bestelling / artikel niet op voorraad of op productie:
>2 weken

D) Op aanvraag:
Sterk wisselende levertermijn. Soms snel leverbaar, soms lange wachttijd.
Concrete levertermijn kan u opvragen via e-mail of telefonisch.

Verzendkosten worden berekend op basis van het gewicht/omvang van het pakket.
U kan de definitieve verzendkost berekenen in uw winkelmandje.

Oversized artikels kunnen op verzoek worden thuis geleverd. De kosten hiervan zijn afhankelijk van de omvang van het product en het type van het afleveringsadres.
Deze artikels staan op de webshop aangegeven met “op aanvraag”. Gelieve ons te contacteren voor meer informatie omtrent de leveringsmogelijkheden en -kosten.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Les délais de livraison sont indicatifs et peuvent changer.
Vous recevrez un délai de livraison final après votre commande.

A) Livraison rapide / article en stock:
2 - 5 jours ouvrés

B) Livraison moyenne / article en stock chez le fournisseur:
5 - 10 jours ouvrés

C) Sur commande / pas en stock ou en production:
> 2 semaines

D) Sur demande:
Délai de livraison très variable. Parfois disponible rapidement, parfois long temps d'attente.
Vous pouvez demander le délai de livraison concret par e-mail.

Les frais de port sont calculés en fonction du poids / taille du colis.
Vous pouvez calculer le coût de livraison final dans votre panier.

Les articles surdimensionnés peuvent être livrés à la maison sur demande. Les coûts dépendent de la taille du produit et du type d'adresse de livraison.
Ces articles sont marqués avec "sur demande". Veuillez nous contacter pour plus d'informations sur les options de livraison et les coûts.
Montage

Recent bekeken Articles consultés